• Mvr Evaporator for Waster Water
  • Mvr Evaporator for Waster Water

Mvr Evaporator for Waster Water

Condition: New
Customized: Customized
Voltage: 380V
Composition: Water Treatment Equipment
Processing Material: Natural Ingredients
Process: Concentration and Dry

Contact Supplier

Diamond Member Since 2017

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company, Group Corporation

Basic Info.

Model NO.
MVR
Material
Stainless Steel
Function
Evaporation
Capcity
100-5000
Standard
GMP
Transport Package
Wooden Box
Specification
100-5000
Trademark
GLOBAL
Origin
Wenzhou
HS Code
8419899090
Production Capacity
50 Per Year

Product Description

Mvr Evaporator for Waster Water
Application:

 Mechanical vapor recompression (MVR) evaporator used is used for milk, glucose, organic acid, VC, xylose, pharmaceutical, chemical, biological engineering, environmental industry, waste recycling industry, paper making industry, salt making industry and so on.
 
 
 
Structure Drawing:
Mvr Evaporator for Waster Water



Structure: MVR evaporator includes pre-heater, heater, pump, separator, vacuum system, compressor system, automatic control system, cleaning system and so on
 
Principle: To feed the material from raw material storage tank through feed pump, the preheating system and the heating system into the heater and the separator. To stop feeding when the liquid level reaches the setting height.
Then to start material circulating pump, the liquid will be circulating in the heater and the separator, to open the steam valve to heat the raw material, when the temperature is reaching the setting temperature, then turn on the vacuum system and compressor, the impeller speed  is gradually increasing, then the system is evaporating, at the same time, the raw material is continuously entering from the bottom of the heater, it is like film flow from bottom to up, it is also heated by steam until boiling, the steam is spraying out from the arc guide groove to separator, the steam will be rotating rise along the wall of the separator and exhaust into compressor, the liquid will drop down to bottom of the separator. The temperature of pure steam will rise after compression, this recycled steam can heat the heater again, so it can save energy. The recycled steam will be cooled and became into hot water which flow into pre heater, to heat the raw material which flow into heater and separator, so the whole system maintained at a constant feed, discharge, evaporation.
Character:
MVR evaporator is new technology for modern industry
1. MVR Evaporator saving technology is the most advanced of the current international evaporator technology requires only a very small amount of Health and steam (when start up, need a small amount of steam, normal operation, is almost no need for the steam), greatly reduce business operating costs, reduce environmental pollution.
2. As a result of compressors to provide heat, and compared to conventional evaporator, the temperature difference is much smaller, to achieve a moderate evaporation, which greatly improve product quality and reduce fouling.
3. No condenser or only a small area condenser, structure and process is very simple, fully automatic, continuous operation, safe and reliable.
4. Equipment with CIP cleaning within the pipeline can be realized inside cleaning, the entire device easy to operate, no dead ends.
5. The evaporator is a material at low temperatures ( evaporation temperature 45ºC-75ºC )and does not generate foam under the state of evaporation, liquid evenly, do not run material, not easy to coking, minimum denaturation for heatinf material
Parameter:

Model MVR-0.5 MVR-1 MVR-1.5 MVR-2 MVR-5 MVR-10 MVR-15
Evaporation capacity 500kg/Hr 1000kg/Hr 1500kg/Hr 2000kg/Hr 5000kg/Hr 10000kg/Hr 15000kg/Hr
Inlet saturated steam capacity(kg/Hr) 500 1000 1500 2000 5000 10000 15000
Inlet saturation temperature (c) 55.295 71.631 82.109 90 90 90 90
Outlet temperature (c) 12.590 14.145 15.185 16.000 16.000 16.000 16.000
Outlet the saturation temperature (c) 67.885 85.776 97.294 106.000 106.000 106.000 106.000
Inlet saturation pressure kPa (A) 15.975 33.441 51.567 70.117 70.117 70.117 70.117
Inlet saturation pressure kPa (A) 28.432 59.596 91.921 125.029 125.029 125.029 125.029
Compression ratio 1.780 1.782 1.783 1.783 1.783 1.783 1.783
Motor power (kw) 40 55 75 95 132 550 640
Outlet volume flow (m^3/s) 0.795 0.7971 0.7985 0.7997 0.7997 0.7997 0.7997
exhaust velocity(m/s) 22.736 22.795 22.837 22.87 22.87 22.87 22.87
Outlet volume flow (m^3/s) 4X4X10 6X4.5X12 8X5.5X14 8X5.5X14 9.5X6X15 12.6X6.5X17 13.6X7X17

 Order requirement:
What is your raw material?
How much is original degree of raw material?
How much the finished degree of product do you want to get?
How much liter do you want to evaporate per hour?
When do you need this machine?

Send your message to this supplier

*From:
*To:
avatar Mr. Tom
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Diamond Member Since 2017

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company, Group Corporation
Management System Certification
ISO 9001, ISO 9000, GMP